The Water Drop Effect Set lets you create a dewdrop-effect manicure.
The set includes two MollyNails products:
Creative Flow Base HEMA/Di-HEMA Free 10 g – a base designed for nail art and special effects, not just the water drop effect. It can be used for designs with a spill, melt, or blown-out effect.
Top Liquid Glass No-Wipe HEMA/Di-HEMA Free Clear 10 g – a transparent, no-wipe top coat with a mirror effect. It is also suitable for traditional use—to seal the design and give it a “glass-like” finish. It can be used to rub in glitter.
The effect can be created on various base colors or nail designs, allowing for a variety of visual effects depending on the composition used and the application method.
Product Features – MollyNails No-Wipe Top Liquid Glass, HEMA/Di-HEMA-Free Clear, 10g:
- HEMA/Di-HEMA Free
- Consistency: thin.
- Transparent product: Reduces the risk of yellowing and color shifts in the colors it is applied to.
- Enhanced resistance to scratches, dulling, and mechanical damage.
- Self-leveling consistency.
- Adds shine and a glass-like effect to the nails.
- No dispersion layer—no need to wipe.
- Allows for the incorporation of mirror-type powders after curing the top coat for 30 seconds in the lamp. (Don’t forget to reapply the top coat after applying the powder!)
- Laser-cut brush.
- Curing time: 60 sec.
Product Features of Creative Flow Base MollyNails HEMA/Di-HEMA Free 10g:
- HEMA/Di-HEMA Free
- Transparent product
- Self-leveling properties
- A base designed for nail art and decorations. It can be used to create a water drop effect, 3D designs, and shapes that look spilled, puffed up, or melted.
Directions for use:
- Prepare the design on which you want to create the water drop effect.
- Apply a layer of Creative Flow Base.
- Cure the Creative Flow Base under a UV/LED lamp for 30–60 seconds.
- Apply a very thin layer of Diamond Top Coat to the freshly cured surface.
- You can apply the top coat directly from the brush, or use a probe or stick to apply it in small dots—depending on the desired effect.
- Observe how the product settles and, if necessary, subtly adjust the shape or placement of the droplets, e.g., with a probe.
- Once you’ve achieved the desired decorative effect, cure the top coat in an LED/UV lamp for at least 60 seconds.
💡 Curing Tip
To ensure the top coat reaches its full potential, cure it continuously for 60 seconds in a properly selected LED/UV lamp.
Remember!
Do not shorten the recommended curing time. Insufficient curing time may affect the product’s performance, including its durability, scratch resistance, and gloss.
60 seconds of continuous curing = Top’s full performance.
Warnings:
- Keep out of reach of children.
- May cause an allergic reaction.
- Avoid contact with skin.
- Avoid contact with eyes.
- Please read the instructions carefully.
Ingredients are subject to change. The current ingredients list is printed on the packaging.
